HMC Electronics ES1035 Chemtronics Flux-Off Rosin Flux Remover User Manual
Page 2
Material
Compatibility
ABS Good
Buna-N Good
EPDM Poor
Graphite Excellent
HDPE Excellent
Kynar
™
Fair
LDPE Fair
Lexan
™
Fair
Neoprene Non-Compatible
Noryl
®
Good
Nylon
™ 66
Excellent
Cross-Linked PE
Excellent
Polypropylene Good
Polystyrene Not
recommended
PVC Good
Silicone Rubber
Not recommended
Teflon
™
Excellent
Viton
™
Excellent
Performance
Product Required for Rosin Removal
(mg solvent used to remove 1 mg rosin flux)
Flux-Off Rosin
101
Conventional Flux Remover
3673
Rosin Removal Rate (mg / in
2
sec.)
Flux-Off Rosin
4.0
Conventional Flux Remover
0.3
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
Spray 4-6” from surface to clean. Wash parts from
top to bottom, allowing the liquid to flush away dirt
and dissolved grease. For precise application use
attached extension tube. Product is Flammable - Do
not use near sources of ignition and energized
equipment.
TECHNICAL & APPLICATION
ASSISTANCE
ITW Chemtronics
®
provides a technical hotline to
answer your technical and application related
questions. The toll free number is:
1-800-TECH-401.
AVAILABILITY
ES1035
10 oz. Aerosol
ES1035
10 oz. BrushClean Aerosol
ES835B
5 oz. BrushClean Aerosol
ES135
1 gallon Liquid
ES535
5 gallon Liquid
ES5535
53 gallon Liquid
ENVIRONMENTAL IMPACT DATA
HCFC-141b
HCFC-225
None
None
HFC
nPB
Aerosol -Yes
None
Hydrochlorofluorocarbons (HCFCs) are regulated under the Montreal Protocol
as Class II ozone depleting substances. HCFC-141b is no longer produced in the
US under this legislation. HCFC-225 is planned for production phase-out in
2015. Hydrofluorocarbons (HFCs) are not currently regulated.
EPA has listed n-propyl bromide (nPB) as an acceptable alternative to ozone
depleting substances in metal, precision, and electronics cleaning under Section
612 of the Clean Air Act.
NOTE: This information is believed to be accurate.
It is intended for professional end users having the
skills to evaluate and use the data properly. ITW
CHEMTRONICS
®
does not guarantee the accuracy
of the data and assumes no liability in connection
with damages incurred while using it.
Chemtronics
® and Flux-Off® are registered trademarks of
ITW Chemtronics. All rights reserved.
All other trademarks herein are trademarks or registered
trademarks of their respective owners.
MANUFACTURED BY:
ITW CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
REV. B (06/09)
DISTRIBUTED BY:
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
(800) 482-4440