HMC Electronics ES6200 Chemtronics Flux Remover, Flux-Off VZ - Manual

TDS # 6200
PRODUCT DESCRIPTION
Flux-Off
®
VZ Flux Remover is a highly
effective cleaner for removing rosin-based
fluxes from electronic components and
assemblies. The non-ozone depleting Verizane
™
solvent system utilizes Vertrel
®
Specialty Fluid
from Dupont
™
to quickly removes flux without
harming sensitive materials.
ƒ Quickly removes all rosin-based flux
residues
ƒ Excellent material compatibility
ƒ Evaporates quickly
ƒ Leaves no residues
ƒ Has low odor
ƒ Penetrates tight tolerance areas
ƒ Also removes oil, grease, and ionic residues
ƒ Contains no CFCs, HCFCs or
1,1,1
Trichloroethane
TYPICAL APPLICATIONS
Flux-Off
®
VZ Flux Remover eliminates flux
residues and cleans:
ƒ Through-hole Circuit Boards
ƒ Surface Mount Pads
ƒ Chip Carriers
ƒ Ball Grid Arrays
ƒ Switches
ƒ SMT Components
ƒ Metal or Plastic Housings
CHEMTRONICS
®
Technical Data Sheet
Flux-Off
®
VZ
Flux Remover
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Boiling Point 95
°F
Specific Gravity
(water = 1@ 77
°F)
1.24
Flash Point (TCC) None
Evaporation Rate
(Butyl acetate=1) >1
Kauri-Butanol
(KB) Number 32
Appearance Clear, colorless liquid
Odor
Ethereal Odor
Surface Tension
(dynes/cm @ 25
°C)
14.0
Solubility in Water Negligible
VOC* Content (aerosol):
CARB 50 %
SCAQMD 444 g/L
Federal 25 %
RoHS Compliant
Shelflife 5 years
*Volatile Organic Compound (VOC) information is calculated on a
weight basis using the VOC definition of California Air Resources
Board (CARB) Consumer Product Regulations, South Coast Air
Quality Management District (SCAQMD) Rule 102 and the Federal
definition published in 40 CFR 51.100(s).
COMPATIBILITY
Flux-Off
®
VZ Flux Remover is generally compatible
with most materials used in the electronics industry.
With any cleaning agent compatibility
solvent/component must be determined on a non-
critical area prior to use.
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440