HMC Electronics ES1015 Chemtronics Ultrajet 70 Canned Air Duster User Manual
Technical data sheet, Ultrajet, Chemtronics

PRODUCT DESCRIPTION
Ultrajet
®
70 is an economical general-purpose
duster with a new BIGGER blast for
electronic applications. Its exceptional purity
jet instantly cleans surfaces free of particulate
contamination. Ultrajet
®
70 is engineered to
remove dirt, dust, oxide particles and other
airborne particles instantly, and can be used to
facilitate the accelerated drying of solvent
cleaners.
Filtered to 0.2 microns
Ozone safe; CFC and HCFC free
Nonflammable; may be used on
energized
equipment
Nonabrasive; safe for most materials.
Will not scratch surfaces
No residue
Cleans hard to reach areas
TYPICAL APPLICATIONS
Ultrajet
®
70 is used in a wide range of
applications including:
Audio/Video Equipment
Fax Machines
Keyboards
Laboratory Instruments
Microcomputers
Photo Equipment
Printers
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
COMPATIBILITY
Ultrajet
®
70 is generally compatible with most
materials used in printed circuit board
fabrication, including sensitive plastics and
compounds. As with any duster/cleaner,
compatibility must be determined on a non-
critical area prior to use.
TDS # 1015
CHEMTRONICS
®
Technical Data Sheet
Ultrajet
®
70
Boiling Point -15.7
°F
Vapor Density (air=1)
@ 77
°F
3.18
Solubility in Water
@ 77
°F F/1 atm
0.10% by weight
Specific Gravity
(water = 1 @77
°F)
1.21
Evaporation Rate >1
(butyl acetate=1)
Appearance Clear, Colorless Gas
Odor
Slight Ethereal
Surface Tension
(dynes/cm @77
°F)
7.8
Flash Point (TCC)
None
Shelflife 5 years
RoHS/WEEE
Status
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
(800) 482-4440