HMC Electronics MCC-DST14A Microcare Precision Duster, Big Blast Canned Air - Manual

Product Details ‡
Chemical Family Hydrofluorocarbon
Aroma Slight, ethereal
Boiling Point -26˚ C / -16˚ F
Evaporation Rate Instant
Vapor Pressure @ 20˚C 96 PSIA
‡ These specifications pertain to HFC-134a.
Health, Safety & Environmental Data
Toxicity Rating (ppm, 8-hr. TWA, TLV) 1000
Flashpoint (TCC) None
Safety Rating Nonflammable
NFPA Health: 1; Fire: 0; Reactivity: 1
Primary Ingredient HFC-134a
(In Europe, these product instead feature an HFO Low GWP pro-
pellant and have different performance, See PS-125 for details.)
Ozone Impact Zero
Organic Content (g/L) MCC-FRZA 12
All others 0
RoHS and WEEE Compliant Yes
F-Gas Compliant (In Europe only) Yes
SNAP Approved Yes
Packaging
Micro•Freeze™ Circuit Chiller 284 g MCC-FRZ*†
Micro•Freeze™ Anti-Stat
284 g MCC-FRZA*
Micro•Blast™, High-Flo Valve 284 g MCC-DST
Micro•Blast™, StatZap™ Valve 284 g MCC-DSTZ*
Big•Blast™, High-Flo Valve
392 g MCC-AIR
Packaged in cases of twelve (12) cans per box. Shelf life is unlimited.
• Products tagged with an asterisk are StatZAP™ compatible. MicroCare strongly
recommends the StatZAP™ dispenser, #MCC-ZAP, to minize damage from
static charges.
† Products tagged with the dagger are available in two different packages, although
the part numbers are identical. In Europe, those products are available only with
the nonflammable Zeus™ Low GWP Propellant, a MicroCare exclusive, and
have safety labeling compliant with EU regulations. Outside of Europe, those two
products use U.S. labeling and HFC-134a as the propellant. In either case, the
quantity of propellant in the aerosols are identical.
Product Notes
AVAILABILITY. This product is available from MicroCare distributors world-wide.
Contact your local distributor at www.MicroCare.com for details.
TRADEMARKS. “MicroCare” and the MicroCare logo are registered trademarks
of MicroCare Corp. “Big•Blast”, “Micro•Blast”, “Micro•Freeze” and “StatZAP” are
all trademarks of MicroCare Corp.
DISCLAIMER. The information set forth herein is based on data believed to be
reliable, but MicroCare makes no warranties express or implied as to its accuracy
and assumes no liability arising out of its use by others. This publication is not
to be taken as a license to operate under, nor to infringe upon, any patents not
herein expressly described.
Precision Dusters
All the MicroCare ® precision duster products deliver clean, dry blasts of a
compressed gas to hard-to-reach surfaces. They enable technicians to
remove dry contamination like dust, lint and sand from circuit boards, precision
mechanical devices and delicate substrates any type. Importantly, the cleaning
is performned without touching the surfaces. Unlike solvent cleaning, which
wets surfaces, these precision dusters are completely dry. These products are
equipped with a high-flow valve which generates enormous “blasting power.”
For static-sensitive applications, the unique, patented StatZAP™ ESD
Eliminator from MicroCare can be used on the StatZAP-compatible versions
of these products.
Freeze Sprays
All Micro•Freeze™ products deliver instant chilling of circuit boards and
components. They exceed the mil specs of -40˚C/-40˚F and may chill to as
low as -60˚C/-76˚F under optimal conditions. None will attack plastics or
generate component-shattering thermal shock. The Anti-Stat Micro•Freeze
includes a static-dissipative additive that evaporates in about sixty seconds.
Other Information
These products all feature HFC-134a as the propellant, which is the industry
standard for nonflammable propellants. This is noncorrosive, residue-free
and plastic-safe. Unlike less expensive products, none of them are flammable
which greatly enhances worker safety.
Special Safety Note: Some companies call their precision dusters by the term
“canned air.” These products do not contain air and should not be used as a
breathing apparatus.
MCC-FRZ PRODUCT SPEC PS-50 Rev. 8/20/2010 Replaces 11/25/2008 Page 1 of 1
MicroCare Corporation
595 John Downey Drive, New Britain, CT 06051 USA
Tel: 860.827.0626 Fax: 860.827.8105
In North America, Dial: 800.638.0125
Email: [email protected]
On the Web: www.MicroCare.com
MicroCare is
ISO 9001:2000
Registered
Technical Specification
Precision Dusters &
Freeze Sprays
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440