HMC Electronics 1500QT Techspray 1500-QT Eco-Shower Degreaser User Manual
Page 2
2
Copyright 2009 Techspray.
For Commercial Use Only
Applications
•
Removal of heavy greases and oils
•
Cleaning on and around heavy machinery
•
Cleaning shelves and other surfaces
Application Suggestions
Heavy degreasing
Leave on 30-60 sec
Light degreasing
2:1 to 10:1
Batch degreasing
Can be used in ultrasonic tank full strength or
diluted, depending on soil
Power washer
10:1 to 30:1
Concrete spot cleaning
Hose off after 15 min
Adhesive cleaning
Leave on 30-60 sec
Stainless steel cleaning (polished)
Wipe until dry
Carpet/upholstery spot remover
1:1 to 3:1 to avoid foaming
e.g. oil, paint
Telecomm cable lube “ickypic”
Use full strength
Adhesive cleaning (dry)
Let soak
Dilution Instructions
•
Full strength – Caked-on grease (e.g. compressors, engines, etc.), grills*, oil stains*
•
10 parts water : 1 part Eco-Shower – Greasy tools, floor (e.g. concrete) stains*, vents,
heavily stained (food) appliances*, scuff marks on doors, heavy grease on wheels
•
30-50 parts water : 1 part Eco-Shower – Chrome fittings, stainless steel, very light general
cleaning
* If on food processing equipment or walking surfaces, must be washed/mopped thoroughly to
avoid slippery surface and undesirable residues.
About TECHSPRAY RENEW
TM
TECHSPRAY RENEW
TM
is a brand that represents High Performance Eco-Cleaning
TM
.
Techspray
®
has applied our expertise in solvent cleaning to formulate some of the most effective
eco-friendly cleaners on the market. Performance is our top priority, using the best “green”
solutions as they become available. We all are at the cusp of the ongoing movement toward
sustainable products, packaging, and processes. It is Techspray’s intention to stay at the cutting-
edge while keeping our products powerful and cost effective.
Directions
•
Spray and saturate the soiled area. Let soak for 30-60 seconds depending on thickness of the
grease.
•
Using a lint-free wipe (we recommend Techspray 2364-50 or 2365-300 wipes), wipe lightly at
first to allow cleaning agent to break down residues.
•
Continue to wipe in a circular motion until the grease or oil is fully removed.
•
For thick greases, reapplication may be needed.
•
On walking surfaces, mop thoroughly after cleaning.
•
Material is easily rinsed by wiping with water dampened cloth.
•
Dispose of soiled wipe as appropriate depending on the type of material removed.
Chemical Components
Component CAS#
Alcohols,C10-14, ethoxylated .......................................................................... 66455-15-0
d-Limonene...................................................................................................... 5989-27-5
Alkyl C16-C18 Methyl Esters ........................................................................... 67784-80-9
Includes other hazardous components in non-reportable quantities.
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
(800) 482-4440