HMC Electronics 1502QT Techspray 1502-QT Pine-Shower Degreaser & Surface Cleaner User Manual
Pine-shower, Degreaser & surface cleaner
1
Copyright 2010 Techspray.
For Commercial Use Only
PINE-SHOWER
™
Degreaser & Surface Cleaner
1502
Introduction
Leveraging the cleaning power of pine, Pine-Shower quickly removes grease and other
soils, and leaves a non-oily finish.
Does not contain butyl cellosolve, which is common in many degreasers and surface
cleaners, and has potential negative health effects. Under California guidelines (CARB),
Pine-Shower has zero VOC, and has a less than 3% VOC under EPA guidelines.
Pine-Shower is economical and considered ready-to-use, but can be diluted for light
surface and equipment cleaning. Pine
-Shower
TM
Cleaner is fully compliant with CARB
(California Air Resource Board) requirements.
Also compliant with European REACH (Registration, Evaluation, Authorization & Restriction of
Chemicals) and WEEE (Waste Electrical and Electronic Equipment Directive) initiatives. It does not
contain RoHS (Restriction of Hazardous Substances) restricted substances, SVHC (Substances of
Very High Concern) list substances, or halides.
Features / Benefits
•
Clean greasy equipment & surfaces
•
Concentrated and dillutable
• Non-flammable
•
pH in neutral range – non-corrosive
•
Safe on most plastics and painted surfaces
• Biodegradable
•
Low VOC, zero GWP
• Non-ozone
depleting
Applications
•
Removal of heavy greases and oils
•
Cleaning on and around heavy machinery
•
Cleaning shelves and other surfaces
Dilution Instructions
•
Full strength – Caked-on grease (e.g. compressors, engines, etc.), grills*, oil stains*
•
10 parts water : 1 part Pine-Shower – Greasy tools, floor (e.g. concrete) stains*, vents,
heavily stained (food) appliances*, scuff marks on doors, heavy grease on wheels
•
30-50 parts water : 1 part Pine-Shower – Chrome fittings, stainless steel, very light general
cleaning
* If on food processing equipment, must be rinsed thoroughly to avoid undesirable residues.
Product Information
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
(800) 482-4440