HMC Electronics ES111 Chemtronics Cleaner and Degreaser, Electro-Wash PX User Manual
Technical data sheet electro-wash, Nx new & improved, Chemtronics
TDS# 1611
PRODUCT DESCRIPTION
Electro-Wash
®
NX New & Improved!
Cleaner Degreaser is an extra strength,
nonflammable electronics cleaner and
degreaser. This high pressure aerosol
cleaning agent quickly removes oxide
particles, dust, oil and grease – evaporating
quickly without leaving residue.
Noncorrosive safe for metals
NSF K2 registered
Nonflammable
Fast drying
Removes oil, grease, dirt, silicone, flux,
adhesive and other contaminants
Contains no CFCs; contains HCFCs
May be used on energized equipment
Available with All-Way Spray valve
TYPICAL APPLICATIONS
Electro-Wash
®
NX New & Improved!
Cleaner Degreaser is engineered for
cleaning:
Circuit Breakers
Motors and Generators
Plugs and Sockets
Potentiometers
Relays and Contacts
Selector Switches
Solenoids
Switching Devices
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
CHEMTRONICS
®
Technical Data Sheet
Electro-Wash
®
NX New & Improved!
Cleaner Degreaser
Boiling Point
>99
°F Initial
Evaporation Rate (butyl acetate=1) >1
Flash Point (TCC) None
Specific Gravity 1.47
Vapor Pressure @68
°F 209 mm Hg
Odor
Ethereal
Solubility in Water Negligible
Kauri-Butanol (KB) Number 56
NSF-Registered K2 #135674 (aerosol)
VOC* Content: Aerosol Liquid
CARB 73% 100 %
SCAQMD 68 g/L 1108 g/L
Federal 4.6% 86
%
RoHS Compliant
Shelflife Aerosols 5 years
Liquids 2 years after opening
*Volatile Organic Compound (VOC) information is calculated on a
weight basis using the VOC definition of California Air Resources
Board (CARB) Consumer Product Regulations, South Coast Air
Quality Management District (SCAQMD) Rule 102 and the Federal
definition published in 40 CFR 51.100(s).
COMPATIBILITY
Electro-Wash
®
NX New & Improved!
Cleaner Degreaser is generally compatible
with most materials used in printed circuit
board fabrication, except acrylics, ABS
resins, polycarbonates and polystyrenes.
With any cleaning agent solvent/component
compatibility must be determined on a non-
critical area prior to use
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
(800) 482-4440