beautypg.com

HMC Electronics 1702-G Techspray Zero Charge ESD Safe Hand Lotion User Manual

Zero charge hand lotion

background image

Zero Charge Hand Lotion

1702

Techspray’s ESD-safe products can help maintain work areas within the ANSI/ESDS20.20 standards set by the ESD Association
(www.esda.com).

In a static-free environment, the work area, tools and personnel form a circuit (see diagram to right). Electrostatic Discharge (ESD)
occurs when the charges of two surfaces with a large electronic potential (difference) equalize instantaneously. The resulting discharge
or spark can cause catastrophic or latent damage to electronic components.

ESD programs maintain an equal potential by maintaining continuous contact with ground, avoiding ESD damage. Cleaners, lotions, and
coatings are an integral part of an ESD control program.

Non-greasy, non-contaminating hand lotion for ESD environments

Improves contact between personnel and grounding devices such as wrist straps and heel straps.
Does not contain silicone, lanolin, mineral oil and other materials found in conventional hand lotions
that can interfere with PCB manufacturing. Blend of moisturizers, aloe vera, and vitamins A and E
penetrate rapidly leaving skin soft without a greasy film.

Improves wrist and heel strap contact
Non-flammable
Non-ozone depleting
Does not contain silicone or lanolin
Non-contaminating — does not interfere with soldering
Non-greasy

Product Packaging

1702-8FP

Zero Charge Hand Lotion

8 oz

24 units/case

1702-G

Zero Charge Hand Lotion

1 gal

1 units/case

Instructions

Apply small amount of lotion to hands and wrists. Massage into skin. Use at start of day, after hands have been washed or anytime skin is dry.

Chemical & Physical Properties

Appearance

White, viscous, opaque cream

Odor

Pleasant

Flash Point

none

VOC (EPA)

VOC (CARB)

Boiling Point

100°C (212°F)

Density

page 1 / 2

Techspray - US office, P.O. Box 949,

Amarillo, TX 79105-0949,

Tel. 806-372-8523, Toll-free 800-858-4043

Fax 806-372-8750, [email protected]

Documentation Provided By HMC Electronics

33 Springdale Ave. Canton, MA 02021

http://www.hmcelectronics.com

(800) 482-4440