HMC Electronics 1505QT Techspray 1505-QT Eco-Shine Glass & Surface Cleaner User Manual
Page 3
Compatibility
Metals
Test method: 15 minute immersion at room temperature in sealed jar, remove, wipe dry, and make observations.
Observations made immediately after removal and drying, and 1 hour later.
Material
Compatibility
Brass foil
Excellent
Copper foil
Excellent
Nickel 200
Excellent
Aluminum 6061
Excellent
Aluminum 2024
Excellent
Anodized aluminum
Excellent
Stainless Steel 316
Excellent
Stainless Steel 304
Excellent
Mild carbon steel
Excellent
Galvanized Steel
Excellent
Note: Eco-Shine™ is a water-based formula, so will encourage oxidation with prolonged exposure to iron, steel, and
other susceptible metals.
Plastics
Test method: Tested as bulk unstressed coupons, and the following immersion times for the base chemistry:
1 minute, 5 minutes, and 15 minutes.
Material
Compatibility
Material
Compatibility
ABS
Excellent
PMMA
Excellent (1)
Nylon
Excellent
POM
Excellent
Lexan
Excellent
PP
Excellent
HDPE
Excellent
PS
Excellent
LDPE
Excellent
PTFE
Excellent
C. E. Phenolic
Excellent
PVC
Excellent
1 = Crazing observed on stressed PMMA. No effect on unstressed PMMA.
Environmental Policy
Techspray
®
is committed to developing products to ensure a safer and cleaner environment. We
will continue to meet and sustain the regulations of all federal, state and local government
agencies.
Packaging and Availability
Eco-Shine
TM
Cleaner available in the following sizes:
1505-100DSP 100 count pre-saturated wipes, 6" x 8" (15cm x 20cm)
1505-QT
1 quart (0.95L) w/ trigger sprayer
1505-G
1 gallon (3.8L)
Available as special order, call for pricing:
1505-5G
5 gallon (19L)
1505-54G
54 gallon (205L)
1505-275G
275 gallon (1,045L)
3
Copyright 2009 Techspray.
For Commercial Use Only
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
(800) 482-4440