HMC Electronics 04001 Hardman Double Bubble Epoxy, Red/White Packet, Extra-Fast Setting Adhesive User Manual
Hardman® extra-fast setting epoxy
Royal Adhesives and Sealants, LLC
600 Cortlandt Street
Belleville, NJ 07109 USA
Tel: (888) 442-7362
Tel: (973) 751-3000
Fax: (973) 751-8407
Web: www.royaladhesives.com
ISO 9001:2000
T
T
E
E
C
C
H
H
N
N
I
I
C
C
A
A
L
L
I
I
N
N
F
F
O
O
R
R
M
M
A
A
T
T
I
I
O
O
N
N
HARDMAN® Extra-Fast Setting Epoxy
DOUBLE/BUBBLE
®
Red Package #04001
PRODUCT DESCRIPTION
HARDMAN Fast-Setting Epoxy is an extra fast setting, two–
component, room temperature curing epoxy adhesive. The
system will cure at as low as –18 °C (0 °F). It has a convenient
mix ratio, excellent cohesive strength and bonds to most
substrates including metal, wood, concrete, ceramics and
many plastics. It is recommended for fast patching, fixturing
and other repairs requiring quick handling strength.
HARDMAN Fast-Setting Epoxy is an excellent, general-purpose
adhesive. It is recommended for the following substrates:
Metal
Plastic
Other
Carbon Steel
Epoxy
Stone
Stainless Steel
Wood
Aluminum
Glass
China
Leather
TYPICAL USES
HARDMAN Fast-Setting Epoxy can be used to repair tools,
auto parts, electrical and electronic components, furniture and
other applications that require a fast-setting adhesive.
PACKAGING
The DOUBLE/BUBBLE package is a handy, dual-pouch, one-
shot, job-size packaging concept. It reduces the waste
typically associated with the use of larger quantities of two-
component adhesives. This unique packaging ensures that
DOUBLE/BUBBLE adhesives are always factory fresh and
accurately portioned for optimum adhesive performance.
HARDMAN Fast-Setting Epoxy is also available in poly bottles,
1-gallon cans, 5-gallon pails and 55- gallon drums.
HOW TO USE
Surface must be clean and dry before application. Remove all
chemicals, dirt, wax and oil.
FOLD SNIP
SQUEEZE
MIX/APPLY
Fold the DOUBLE/BUBBLE package along the center seal, snip
the end, squeeze out the contents, mix thoroughly and apply.
TYPICAL WORKING PROPERTIES
Part A
Part B
Mixed
Color
Amber Amber Amber
Viscosity @ 25 °C,cps
55,000
10,000
40,000
Weight per Gallon, lbs.
10
9.4
9.7
Specific Gravity @ 25 °C
1.2
1.13
1.16
Flash Point, PMCC, °C
157
132
– – –
Work Time, minutes
– – –
– – –
3
Handling Strength, minutes
– – –
– – –
15 - 30
Shelf Life, months
24
24
– – –
TYPICAL CURED PHYSICAL PROPERTIES
(Tested at 25 °C unless otherwise indicated)
Test
Results
Hardness, Shore D
80
Maximum Service Temp.
82 °C (180 °F)
The Lap Shear and T-Peel strength of acid-etched aluminum
to aluminum is shown below:
Lap Shear Strength (various cure schedules)
Cure Schedule @ 25 °C
15 min.
30 min.
60 min.
Shear Strength, psi
150
1,000
1,500
Lap Shear Strength (cure schedule 24 hrs. @ 25 °C)
Test Temperature
–40 °C 25 °C 38 °C 66 °C 82 °C 93 °C 149 °C
Shear Strength, psi 1,695
3,000 2,400 1,100
655
300
245
T–Peel Strength (cure schedule 24 hrs. @ 25 °C)
Test Temperature
–40 °C
25 °C
82 °C
Peel Strength, pli
1.5
1.8
2.5
STORAGE AND HANDLING
Store DOUBLE/BUBBLE adhesives at room temperature in a
dry environment. Extreme low temperatures may cause
crystallization. Extreme high temperatures may degrade the
properties.
A wide variety of cleaning solutions are available for cured and
uncured epoxies and polyurethanes
SAFETY
These materials are intended for commercial and industrial
use only, and the practices of good housekeeping, safety and
cleanliness should be followed before, during and after use.
Although the system contains low volatility materials, care
should be taken in handling. Use adequate ventilation in the
work area.
These materials may cause dermatitis in susceptible
individuals. Keep off skin and out of eyes. In case of
DS-DB_04001-10/02-Rv.D
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
(800) 482-4440