HMC Electronics 04004 Hardman Double Bubble Epoxy, Green/White Packet, Clear Impact Resistant Adhesive User Manual
Hardman® water-clear epoxy
![background image](/manuals/562046/1/background.png)
Royal Adhesives and Sealants, LLC
600 Cortlandt Street
Belleville, NJ 07109 USA
Tel: (888) 442-7362
Tel: (973) 751-3000
Fax: (973) 751-8407
Web: www.royaladhesives.com
ISO 9001:2000
T
T
E
E
C
C
H
H
N
N
I
I
C
C
A
A
L
L
I
I
N
N
F
F
O
O
R
R
M
M
A
A
T
T
I
I
O
O
N
N
HARDMAN® Water-Clear Epoxy
DOUBLE/BUBBLE® Green Package #04004
PRODUCT DESCRIPTION
HARDMAN Water-Clear Epoxy is a two–component, room
temperature cure epoxy system. It offers a unique feature of
being a water–clear and transparent adhesive. This system
contains no solvents and can also be used as a coating. With
its solventless feature, it can be applied over old coatings
without raising them. It is self–leveling and blush–free so that
it will cover and fill scratches.
HARDMAN Water-Clear Epoxy is recommended for the
following substrates:
Metal
Plastic
Other
Stainless Steel
Epoxy Glass
Aluminum Phenolic
China
TYPICAL USES
HARDMAN Water-Clear Epoxy is designed to repair printed
circuit boards (it does not electrically corrode copper), optical
fibers, lenses and other optical equipment, jewelry, art objects
and other applications where a clear bond is desired.
PACKAGING
The DOUBLE/BUBBLE package is a handy, dual-pouch, one-
shot, job-size packaging concept. It reduces the waste
typically associated with the use of larger quantities of two-
component adhesives. This unique packaging ensures that
DOUBLE/BUBBLE adhesives are always factory fresh and
accurately portioned for optimum adhesive performance.
HARDMAN Water-Clear Epoxy is also available in poly bottles,
1-gallon cans, 5-gallon pails and 55-gallon drums.
HOW TO USE
Surface must be clean and dry before application. Remove all
chemicals, dirt wax and oil.
FOLD
SNIP
SQUEEZE
MIX/APPLY
Fold the DOUBLE/BUBBLE package along the center seal, snip
the end, squeeze out the contents, mix thoroughly and apply.
TYPICAL UNCURED PROPERTIES
Part A
Part B
Mixed
Color
Clear
Clear
Clear
Viscosity @ 25 °C, cps.
15,000
10,000
14,000
Weight per Gallon, lbs.
9.7
9.2
9.5
Flash Point
470 °F
243 °C
410 °F
210 °C
– – –
Work time, minutes
– – –
– – –
60
Tack free time, minutes
– – –
– – –
180
Handling Strength, hours
– – –
– – –
8
Shelf Life, months
24
24
– – –
TYPICAL CURED PHYSICAL PROPERTIES
(Tested at 25 °C unless otherwise indicated)
Test
Result
Impact Strength, ft.–lbs.
18
Maximum Service Temp.
82 °C (180 °F)
Water Resistance
Excellent
Lap Shear Strength (acid-etched aluminum to aluminum)
Cure Schedule @ 25 °C
5 hours 24 hours 72 hours
1 week
Shear Strength, psi
500
1,200
1,800
2,400
Hardness: (cure schedule 7 days @ 25 °C)
Test Temperature
25 °C
66 °C
93 °C 121 °C 149 °C
Hardness, Shore D
85
80
20
15
15
TYPICAL CHEMICAL RESISTANCE PROPERTIES
(Tested at 25 °C unless otherwise indicated)
Total Immersion In:
Immersion
Time, Days
% Weight
Gain (Loss)
Comments
Water 1
8
0.2
0.6
Ethyl Alcohol 50%
Solution
1
8
1.85
3.45
Specimen softens
Hydrochloric Acid
1
8
0.67
1.91
Gasoline 1
8
0.08
0.16
Sulfuric Acid
1
8
1.09
1.68
Specimen softens
Toluol
1
8
4.97
10.38
Specimen softens
1,1,1 Trichloroethane
1
8
21.92
– – –
Specimen softens
& Degradation
occurs
VM and P Naphtha
1
8
0.13
0.24
DS-DB_04004-10/02-Rv.D
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
(800) 482-4440