HMC Electronics CW2400 Conductive Silver Epoxy Kit - Manual

TDS # CW2400
PRODUCT DESCRIPTION
CircuitWorks
®
Conductive Epoxy is a two
part, silver epoxy used in prototype, repair
and general conductive bonding
applications. CW2400 features strong
mechanical bonds, excellent electrical
conductivity, and quick room temperature
curing. CircuitWorks
®
Conductive Epoxy
bonds aggressively to a wide variety of
materials.
ƒ Two-component product
ƒ Simple mixing ratios
ƒ Excellent electrical conductivity
ƒ Fast curing
ƒ High strength bond
ƒ Bonds dissimilar surfaces
ƒ Operating temperature range from
ƒ -91
°C (-131°F) to 100°C (212°F)
TYPICAL APPLICATIONS
CircuitWorks
®
Conductive Epoxy may be
used for electronics applications including:
ƒ Conductive Bonds Between Heat
Sensitive Components
ƒ Solderless Surface Mount Connections
ƒ Circuit Board Trace Repair
ƒ Static Discharge and Grounding
ƒ Solder Repair
ƒ Conductive Structural Adhesions
CHEMTRONICS
®
Technical Data Sheet
CircuitWorks
®
Conductive Epoxy
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Composition
Material Part A Epoxy
Part B Hardener
Specific Gravity 4.0
(Parts A & B Mixed)
Cured Compound
Volume Resistivity <0.001 ohm-cm
Thermal Conductivity
Cal-cm/sec-cm
2
-
°C 3.8 x 10 -3
BTU-in/hr-ft
2
-
°F 11.0
W/m
°K 1.6
Operating Temperature -131 to 212
°F
Range (-91 to 100
°C)
Lap Shear >1200 lbs/in
.
(ASTM D-1002)
Shore Hardness >70
Dropping Point None @ 650
°F
(ASTM D-2266) (343
°C)
Adhesion Excellent
Cured Flexibility Excellent
Chemical Resistance Excellent
Moisture Resistance Good
Typical Thickness 5 mil
Shelflife 9 months
Conditions: Store at temperatures below 77
° F
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440