Material safety data sheet – HMC Electronics 2102-GHV Techspray Silicone Conformal Coating, High Viscosity SR User Manual
Page 4
MATERIAL SAFETY DATA SHEET
Finished Product
Date Issued: 01/03/2003
MSDS No: 2102-GHV/5GHV
Date Revised: 07/20/2010
Revision No: 5
Fine-L-Kote SR (High Viscosity)
BOILING POINT: 79°C (134°F)
FREEZING POINT: Not Applicable
FLASHPOINT AND METHOD: (40°F) TAG CC
SOLUBILITY IN WATER: Insoluble
SPECIFIC GRAVITY: 0.830 (water=1)
(VOC): 378.000 g/L (non-exempt VOC)
10. STABILITY AND REACTIVITY
STABLE: Yes
HAZARDOUS POLYMERIZATION: No
STABILITY: Stable.
CONDITIONS TO AVOID: Heat, flames, ignition sources, and incompatables.
INCOMPATIBLE MATERIALS: Concentrated nitric and sulfuric acid mixtures, chloroform, alkalis,
chlorine compounds, acids, potassium t-butoxide.
11. TOXICOLOGICAL INFORMATION
EYE EFFECTS: Not Available
SKIN EFFECTS: Not Available
CARCINOGENICITY
Chemical Name
NTP
Status
IARC
Status
OSHA
Status
Polysiloxane mixture
NOT
LISTED
NOT
LISTED
NOT
LISTED
IARC: NOT listed
NTP: NOT listed
OSHA: NOT listed
REPRODUCTIVE EFFECTS: Toluene is listed as a reproductive hazard.
12. ECOLOGICAL INFORMATION
ENVIRONMENTAL DATA: There is limited information available on the environmental fate and effects of
this material. The primary environmental concern for release is the impact on aquatic and terrestrial
species. Due care should be taken to avoid the accidental release of this material into the environment.
Page 4 of 7
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
(800) 482-4440