EUCHNER CES-A-W5H-01 (Multicode) - Manual (Page 5)

System Manual Safety System CES-A-W5H-01
5
General Safety Instructions
Check the safe function of the safety guard particularly
after any setup work
after the replacement of a CES component
after an extended period without use
after every fault
Independent of these checks, the safe function of the safety guard should be
checked at suitable intervals as part of the maintenance schedule.
Warning!
Danger of fatal injury in the event of incorrect connection or incorrect use.
Safety switches must not be bypassed (bridging of contacts), turned away,
removed or otherwise rendered ineffective.
On this topic pay attention in particular to the measures for reducing the pos-
sibility of bypassing from EN 1088:1995+A:008, section 5.7.
The device is only allowed to be installed and placed in operation by authorized
personnel
who are familiar with the correct handling of safety components
who are familiar with the applicable EMC regulations
who are familiar with the applicable regulations on health and safety
who have read and understood the operating instructions and the system
manual





Important!
Prior to use, read the operating instructions and the system manual of the CES
components used, and keep these in a safe place. Ensure the operating instruc-
tions and the system manual are always available during mounting, setup and
servicing. EUCHNER cannot provide any warranty in relation to the readability
of the CD for the storage period required. For this reason you should archive
a printed copy of the system manual. If you should lose the operating instruc-
tions or the system manual, you can download these documents from www.
EUCHNER.de.



