EUCHNER CES-A-W5H-01 (Multicode) - Manual (Page 10)

System Manual Safety System CES-A-W5H-01
10
Actuator and safety switch must be fitted so that
the front faces are at the minimum switch-on distance 0.8 x S
ao
or closer
(see section Operating distances). To avoid entering the area of possible side
lobes, a minimum distance is to be maintained in case of a side approach
direction. See section Typical operating distance for the related actuator.
when the safety guard is open up to the distance S
ar
(assured switch-off dis-
tance), a hazard is excluded.
the actuator is positively mounted on the safety guard, e.g. by using the
safety screws included.
they cannot be removed or tampered with using simple means.
Pay attention to the maximum tightening torque for the read head or safety
switch and actuator mountings of 1 Nm. For read heads/actuators made of
PE-HD, the maximum tightening torque is only 0.5 Nm.





