Specifications, Ordering spare parts, Warranty / service – ERICO SBG150 Rail Grinder User Manual
Page 7
1
www.erico.com
SPECIFICATIONS
ENGINE: ERICO
®
Part No. B3394
Type: Single Cylinder, 2-Stroke Engine
Power Head: EFCO (Olympyc) Model 940
Displacement: 39cc (2.38 cu in)
IGNITION:
Spark Plug: Champion RCJ-74 or equivalent
Spark Plug Gap: 0.5 mm (.02”in)
GRINDING WHEEL:
Diameter: 152 mm (6”) max.
Arbor: 15.8 mm (5/8”) (with bushing)
Type: ERICO
®
Approved
Rated RPM: 6,000 max.
FUEL/OIL SYSTEM:
Air Filter: Special filter (Reusable)
Fuel Capacity: 0.41 Liter (13.8 fl.oz.)
Fuel Mixture: ref. FUEL MIX Section
Drive (Chain) Lubrication: Not Available
WEIGHT:
Model SBG150: 18.2 Lbs (8.3 Kg)
ORDERING SPARE PARTS
Please provide the Model No. and Item No. as noted on the appropriate exploded views found in this manual.
WARRANTY / SERVICE
You must use the ERICO factory or an authorized ERICO service center to perform all repairs of grinders. Any repairs made by
non-authorized service centers and/or personnel will void all warranties.
- 6Z34VF14 Rod Hanging Basket Tray Clip (1 page)
- 766PM Far Side Box Support (1 page)
- 766PMD Far Side Box Support (1 page)
- CADDY MPVTI Low Voltage Mounting Clip (2 pages)
- H-Series CADDY PYRAMID Support System (3 pages)
- CADDY PYRAMID RL, PIPE RETAINERS (2 pages)
- CADDY PYRAMID Rooftop Equipment Support (4 pages)
- CADDY PYRAMID Single Post Support (1 page)
- CADDY PYRAMID TF Series, Fixed Height Tool-Free Supports (2 pages)
- CADDY ROD LOCK Anchor Screw (2 pages)
- CADDY ROD LOCK Beam Clamp (2 pages)
- CADDY ROD LOCK Channel Nut (2 pages)
- CADDY ROD LOCK L-Bracket (2 pages)
- CADDY ROD LOCK Strut (2 pages)
- CADDY SPEED LINK Riveted Accessories (4 pages)
- CADDY SPEED LINK SLK-Keyless Locking Device and Bulk Cable (2 pages)
- CADDY SPEED LINK SLK-Keyless Locking Devices (2 pages)
- CADDY SPEED LINK-Accessory Cables (1 page)
- CADDY SPEED LINK-SLK Cable End Accessories (4 pages)
- TSGB Series Screw Gun Bracket (2 pages)
- GLIDER Electrical Box Attachment (2 pages)
- H Series-Electrical Box Bracket (2 pages)
- ROD LOCK Plywood Pre-set Anchor (2 pages)
- ROD LOCK Strut End Bracket (2 pages)
- ROD LOCK Strut (2 pages)
- CADDY ROD LOCK Strut Nut (2 pages)
- CER4 Cable from Stud (2 pages)
- High Performance CADDY CAT HP J-Hook Assemblies (6 pages)
- KBT Wire Basket Tray Clip (1 page)
- MPCB1220 (2 pages)
- SBC Series, Beam Clamp, 3/8" and M10 (1 page)
- TSR200 Telescoping Strut Replacement Bracket (2 pages)
- TSRBS1625 Telescoping Box (3 pages)
- Universal Pedestal Clamp (2 pages)
- Branch Line Restraint Device (2 pages)
- Branch Line Restraint Strucural Attachment Fitting for Steel 12 gauge (2 pages)
- Branch Line Restraint, Structural Attachment Fitting for Concrete or Wood (2 pages)
- Branch Line Restraint, Structural Attachment Fitting with 3/8"-16 male thread" (2 pages)
- 510 CADDY EZ RISER (2 pages)
- 429 CADDY MACROFIX PLUS NI (1 page)
- Seismic Hanger Clamps (3 pages)
- CADDY PYRAMID Equipment Supports (3 pages)
- CADDY ROD LOCK Bottom-Mount Duct Bracket (2 pages)
- Bottom-Mount Duct Bracket, Narrow (2 pages)
- Top-Mount Duct Bracket (2 pages)