Brother 565 - Manual (Page 87)

10 - 1 MAKING COPIES
10
Using the fax machine as a copier
You can use this fax machine as a copier. Always make sure you have paper in the
paper tray before making copies.
Copy operations
To make a single copy that is not reduced, enlarged or sorted, you only have to
press one key. Remember, your machine cannot scan anything closer than 1/6 in.
(4 mm) from the edge of the paper.
Making a single copy
1
Insert the original face down in the ADF.
2
Press Copy/Reports twice.
To cancel, press Stop/Exit .
Do NOT pull on the paper while copying is in progress.
Making copies
Incoming faxes cannot be received on paper or into the memory while the fax
machine is copying.
The default resolution for a single copy is S.FINE. Set the resolution to PHOTO
for photographs by using the
Resolution key.
Copy Key
Not
Scannable
area
1/6" (4 mm)
1/8" (3 mm)
1/6" (4 mm) 1/6" (4 mm)