Brother 565 - Manual (Page 71)

6 - 13 SETUP SEND
5
Press 1 if you want to choose more settings and the LCD will return to the
SETUP SEND menu.
—OR—
Press 2 if you have finished choosing settings, and go to step 5.
6
Press Fax Start . The LCD displays POLLED WAITING.
Memory Transmission
This feature allows the fax machine to scan a fax into its memory and send it as soon
as the scan is complete. This way, you don’t have to wait for the entire fax to be
transmitted before you retrieve your document.
1
Insert the original face down in the ADF.
2
Press Menu/Set , 3 , 9 .
3
To change the default setting, press or
to select ON (or OFF).
Press Menu/Set .
Go to Step 5.
—OR—
For the next fax transmission only, press or to select
NEXT FAX ONLY .
Press Menu/Set .
4
For the next fax only, press or to select ON (or OFF).
Press Menu/Set .
5
Press 1 to select additional settings. The display returns to the
SETUP SEND menu.
—OR—
Press 2 if you are finished choosing settings and go to Step 6.
6
Enter fax number and press Fax Start .
If you get an OUT OF MEMORY message while scanning the first page of a fax,
press
Stop/Exit to cancel the scan. If you get a OUT OF MEMORY message
while scanning in a subsequent page, you’ll have the option to press Fax
Start to transmit the pages scanned so far, or to press Stop/Exit to cancel
the operation. In this case, send the fax by the Manual Transmission.
Depending on your typical faxes, OUT OF MEMORY errors can occur
frequently. If this happens, change the Memory Transmission setting back to
OFF
.
9.MEMORY TX
MEMORY TX:ON
SELECT ↑ ↓ & SET