Brother 565 - Manual (Page 79)

7 - 7 QUICK-DIAL NUMBERS AND DIALING OPTIONS
Pause
Press Redial/Pause to insert a 3.5-second pause between numbers. If you are
dialing overseas, you can press Redial/Pause as many times as needed to
increase the length of the pause.
Hold
1
Press Hold/Caller ID to put a call on Hold.
2
You can replace the handset without disconnecting the call.
3
Pick up the fax machine handset to release the call from Hold. Picking up an
extension handset will not release the call from Hold.
Fax Redial
If you’re sending a fax manually and the line is busy, press Redial/Pause to try
again. Any time you want to make a second call to the last number dialed, press
Redial/Pause to save time.
If you’re sending a fax automatically and the line is busy, the fax machine will
automatically redial one time five minutes after the transmission.
Tone or Pulse (Canada only)
If you have a Pulse dialing service, but need to send Tone signals (for example, for
telephone banking), follow the instructions below. If you have Touch Tone service,
you will not need this feature to send tone signals.
1
Lift the handset of an external phone.
2
Press # . Any digits dialed after this will send tone signals.
3
When you hang up, the fax machine will return to the Pulse dialing service.