Environmental Express SPE-Express with Cover - Manual (Page 8)

SPE-­‐Express
Operation
and
Instruction
Manual
www.envexp.com 7
1.3.2 Software
• Computer must be Windows based, XP or newer with a minimum 2 GB RAM. Dual core processor
recommended.
1.4 Electrical Requirements
• Required Voltage is 120VAC, ~60 Hz, 15A for the G8000 and 220-240VAC, ~50 Hz, 7.5A for the G8000-240.
• Power should not vary greater than 10%. Use the supplied power cord or equivalent to connect to the
power supply. For safety reasons, a separate power receptacle should be provided for each SPE-Express.
Do not use extension cords or outlet adaptors. Make certain that power outlets are earth-grounded at the
grounding pin.
1.5 What’s Included
• Box # 1:
SPE-Express System
Base 3-Station Unit
Software Flash Drive
Operation and Instruction Manual
• Box # 2:
Reagent Rack Kit
Carboy
Tubing with Bottle Harnesses
• Box # 3:
(2) 5.5 Gram Na
2
SO
4
Drying Cartridges, 50 pack
Aluminum Weigh Dishes, 105mm, 100 pack
UltraFlow Filter Assemblies, Disposable 47mm, 100 pack
• Other items included:
USB Cable, Power Cable, 15 Pack of Filter O-Rings, Fastener Tool, Adapter Wrench, Drying Cartridge
Extractor Tool, and Capacitive Sensor Calibration Tool, Reagents Pressure Hose
1.6 Other Items Needed
• Vent Hose, 4" Diameter
• Vacuum Source (vacuum connection should be an Industrial-Shape Quick Connection 0.25" Socket in
order to connect to the bottle harness)
• Power Supply (specified page 7)
• Sample Jars (Environmental Express Catalog # ESS09500050)
• Nitrogen Source (70 psi minimum / 110 psi maximum). Other inert gases are acceptable. (Supply hoses
must be an Industrial-Shape Quick Connect 0.25" Socket in order to connect to unit).
• Containers – All with GL38 threads
- N-Hexane Waste Container – 1 Liter
- n-Hexane Reagent Bottle - 4 Liter
- DI Water Bottle - 1 Liter
- Methanol - 1 Liter