Environmental Express SPE-Express with Cover - Manual (Page 38)

SPE-­‐Express
Operation
and
Instruction
Manual
www.envexp.com 37
4.0 Data Recovery
After it is installed, the software creates a folder named SPE-Express Test Data. Data for each test run will automatically be
written to an individual file within that folder.
There are two ways to access Test Data:
• The Data Viewer within the SPE-Express software
o Click the “Data Viewer” button on the Main Screen, or press the “F7” key on your computer. You can
also click “View Data (or F1) in the Operator Test Screen
o Once in the Data Viewer, press “F1” or click “Load” to select a test data file
o Individual files can be printed by pressing “F2” or clicking “Print”
o Press “Esc” or click “Exit” to close the Data Viewer
• Opened using Excel from the “SPE-Express Test Data” folder created when the software is installed
o This folder can be found on the user’s C drive within the SPE-Express folder created during installation
of the software.
o Test files are automatically saved by date_time_sample ID #. The operator can arrange the files within
the folder to their liking
o Operator can edit the files in Excel to include pre-and post-test pan weights