Environmental Express SPE-Express with Cover User Manual
Page 35
Environmental Express, Inc.
800.343.5319/843.881.6560
34
3.6 Manual Operation
The Manual Interface Screen allows for the control and manipulation of up to 6 stations (3 stations/unit, up to 2
units total). Only users with the permission level of “Administrator” or “Maintenance” are allowed to access this
screen, due to the potential of serious safety hazards. Press the “Manual Screen” button or press F8 on the SPE-
Express Main Screen. The following directions apply to all available station tabs located in the upper left hand
corner of the screen.
The software will show the following message when opening the manual screen:
WARNING: Ensure that the “Nitrogen-To Reagents” line is disconnected before using this utility. Otherwise, danger
to personnel and damage to equipment could result.
3.6.1
Solenoid Control Interface
In this area, the user may manipulate the solenoids for the various liquids and gases used by the station.
Press the corresponding buttons to power these solenoids:
•
Hexane Bottle Rinse Solenoid