Blaupunkt DX-R70 User Manual
Page 99
99
INTRODUCTION
NAVIGATION
RADIO MODE
CD MODE
INDEX
SETUP
CD CHANGER
ENGLISH
DEUTSCH
DEUTSCH
DEUTSCH
•
POSITION MARK
•
GPS STATUS
•
TRAFFIC AHEAD
•
TIME INFO
•
LOCATING
To programme the macro button, proceed as follows:
1
Press and hold the macro button
4
until the macro button setup menu
opens or
if you are in a main menu,
1
press the MENU button
:
twice.
✔
The unit switches to the setup menu.
If the setup menu of an audio source or the navi menu is already active,
1
press the MENU button
:
once.
✔
The unit switches to the setup menu.
2
Move the selection marker to the
MACRO BUTTON
menu item.
3
Press the OK button
8
.
✔
The
MACRO BUTTON
setup menu opens. The selection marker is positio-
ned over the first item in the list, and the function that is currently assi-
gned to the macro button is indicated by an arrow.
If you want to assign another function to the macro button,
1
use the / buttons on the rocker switch
7
to select the required
function and
2
press the OK button
8
.
✔
The function assigned to the macro button is changed and the main set-
up menu opens. The symbol for the newly assigned macro button chan-
ges.
Press the ESC button
<
to return to the initial menu.
MACRO BUTTON
ROUTE GUIDANCE
TA-FUNCTION
ROUTE OPTION
LAST 10
DEST. MEMORY
MACRO BUTTON
DEST. MEMORY
LAST 10
POSITION MARK
GPS STATUS
TRAFFIC AHEAD