Blaupunkt DX-R70 - Manual (Page 79)

79
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER
ENGLISH
DEUTSCH
DEUTSCH
DEUTSCH
Deleting all names
If you want to delete all the CD names from memory, proceed as follows:
1 Open the CD name menu and
2 press the softkey assigned to the CLR ALL menu item.
✔ A confirmation request appears. If you are sure you want to delete all the
CD names,
3 select YES with the button on the rocker switch 7 .
4 Press the OK button
8
.
If you do not want to delete the names,
1 press the ESC button
<
.
Programming playlists
You can programme the tracks on a CD that you want to listen to.
This means you can prevent tracks from being played that you do not want to
listen to. Tracks can only be programmed in ascending order, e.g. 1, 4, 7, etc.
but not 3, 1, 4, etc.
Defining a playlist
To define a playlist,
1 switch to the CD functions menu by pressing the CD.C button @ ,
2 press the softkey assigned to the PROGRAM menu item.
EDIT
CLR NAME
CLR ALL
SCAN
CDC
PROGRAM
NAME
MIX
REPEAT