Distance min 350 ft – Blaupunkt DX-R70 User Manual

Page 104

INTRODUCTION

NAVIGATION

RADIO MODE

CD MODE

INDEX

SETUP

CD CHANGER

104

Note: No navigation is possible during the first 25% of the calibrati-
on procedure after

NEW INSTALL

is selected.

The route that you have to drive along depends on various factors
such as the quality of GPS reception and the route itself. The speci-
fied distance in kilometres is only an average value. It can also be
considerably shorter or considerably longer if conditions are poor.

Calibration after a tyre change

It may be necessary to recalibrate the TravelPilot after a tyre change.

Select

CALIBRATION

from the

INSTALLATION

setup menu.

Select and confirm the

TYRE CHANGE

menu item.

Carry out the steps as instructed by the system.

Manually calibrating the system

You can also manually calibrate the system. You will be required to drive a route
of at least 100 meters at a maximum speed of 30 km/h. Please note that a route
must be used that has been measured as precisely as possible.

Select

CALIBRATION

from the

INSTALLATION

setup menu.

Select and confirm the

MANUAL

menu item.

✔

You will now be asked to enter the length of the route that you want to
drive.

Select the first digit of the route length and

press the OK button

Enter the remaining digits of the route length in the same way.

Confirm the details you entered using the

symbol and the OK button

or by pressing the OK button

for a longer period.

DISTANCE

MIN 350 ft

123456789