Blaupunkt DX-R70 User Manual
Page 100
INTRODUCTION
NAVIGATION
RADIO MODE
CD MODE
INDEX
SETUP
CD CHANGER
100
Setting the clock
In the
CLOCK
setup menu, you can activate / deactivate summer time, set the
time format (12/24 hour), and set the time zone in relation to the standard time
(GMT). These settings are necessary so that the TravelPilot can calculate the
system time from the received GPS time. In addition, you can activate / deacti-
vate the status clock (when the status clock is active, the time is displayed in the
status line of the currently active audio source), and turn the main clock on / off
(time display when the unit is switched off and the ignition is turned on).
Switching the status clock on/off
1
Select the
CLOCK
menu item in the setup menu.
2
Highlight
STATUS CLOCK
.
3
Keep pressing the OK button
8
until the required
ON
or
OFF
setting is
displayed.
Note: The status clock hides other symbols in the main menus of
the audio sources.
Switching the main clock on/off
1
Select the
CLOCK
menu item in the setup menu.
2
Select
MAIN CLOCK
.
3
Keep pressing the OK button
8
until the required
ON
or
OFF
setting is
displayed.
Selecting the time format
1
Select the
CLOCK
menu item in the setup menu.
2
Select
SETTINGS
.
3
Select the
TIME FORMA
menu item.
4
Keep pressing the OK button
8
until the required
12H
or
24H
setting is
displayed.
CLOCK
SETTINGS
MAIN CLOCK
OFF
STATUS CLOCK
OFF
CLOCK
TIME ZONE
+1
GPS TIME
02:42 h
SYSTEMTIME 03:42 h
SUMMER TIM
OFF
TIME FORMA
24H