Jump, Reg on pty on rds var off r-txt off sharx off ta – Blaupunkt DX-R70 User Manual

Page 58

INTRODUCTION

NAVIGATION

RADIO MODE

CD MODE

INDEX

SETUP

CD CHANGER

Switch to radio mode.

Press the MENU button

✔

The radio mode’s setup menu appears.

You will find the

RDS

item in the lower left display line. You can choose between

the

VAR

FIX

and

OFF

options. The default setting is

VAR

Keep pressing the softkey associated with

RDS

until the required option

appears alongside

RDS

FIX

: RDS radio mode is activated. Since some stations not only use RDS

to broadcast their names but also advertising, you have the option of
keeping the station name permanently in the display. Changing display
contents, e.g. advertising, will not be displayed.

VAR

: Default setting; RDS radio mode is fully activated. Changing dis-

play contents, e.g. advertising, will also be displayed.

OFF

: RDS radio mode is deactivated. Stations can be tuned into using

the frequency details in the display. The “alternative frequency” function
is also deactivated.

Activating / deactivating RDS-REG

A further advantage provided by RDS is the “alternative frequency” function.
The unit constantly tunes into the frequency offering the best reception for a
particular station. However, some stations divide their content at certain times
into regional programmes that are tailored to a certain region. The “alternative
frequency” feature may therefore sometimes interrupt reception of a regional
programme because it has automatically switched frequency. If you are liste-
ning to a regional programme and want to prevent the unit from switching to
another frequency, select the

setting for the

REG

item in the radio mode

menu. The unit will then only retune if it appears that a “loss of reception” is
about to occur, i.e. if the station can no longer be received on the tuned frequen-
cy.

JUMP

REG

PTY

RDS

VAR OFF

R-TXT

OFF

SHARX

OFF