Blaupunkt DX-R70 - Manual (Page 80)

INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER
80
✔ The programme menu opens. If you have not selected any tracks yet, the
CLR PRG and RUN items cannot be selected. If this is the case, they will
be marked with a lock symbol.
3 Use the / buttons on the rocker switch 7 to select the track you
want to play first.
4 Press the softkey assigned to the ADD menu item.
5 Select the next track in the playlist and
6 press the softkey assigned to the ADD menu item.
Repeat these steps with all the tracks that you want to include in your playlist.
TIP: The programmed playlist remains stored in memory even after you
remove the CD from the unit. When you insert the CD again, you will be
able to access the programmed playlist again.
Deleting tracks from playlists
To delete tracks from the playlist,
1 open the programme menu,
2 select the track you want to delete using the / buttons
7
and
3 press the softkey assigned to the SKIP menu item.
Starting / stopping a playlist
Once you have included all the tracks you want in the playlist,
1 press the softkey assigned to the RUN menu item.
✔ The main CD menu appears. All the tracks included in the playlist are
marked as such in the track display.
TPM appears in the status line.
To stop a playlist whilst it is running without deleting it,
1 press the softkey assigned to the RUN menu item again.
ADD
RUN
SKIP
CLR PRG
CLR ALL
ADD
RUN
SKIP
CLR PRG
CLR ALL