Jump, Tmcstore scan tmc-scan page 1 t-store, Reg on pty on rds var off r-txt on sharx on ta – Blaupunkt DX-R70 User Manual
Page 67
67
INTRODUCTION
NAVIGATION
RADIO MODE
CD MODE
INDEX
SETUP
CD CHANGER
ENGLISH
DEUTSCH
DEUTSCH
DEUTSCH
Starting TMC Store
If you want to start TMC Store,
1
switch to the radio functions menu by pressing the TUNE button
A
and
2
press the softkey assigned to the
PAGE 2
menu item.
3
Press the softkey assigned to the
TMCSTORE
menu item.
✔
The activity of TMC Store is indicated symbolically in the display. The
progress is displayed as a percentage in the title line. After TMC Store
has finished, all the stations stored in the FMC memory are played briefly,
and the unit then switches to the station stored in memory location one.
Note: A TMC Store session can take a very long time because the
entire frequency range is scanned for receivable TMC stations.
Reducing reception interference in FM mode
Neighbouring stations may occasionally cause interference to reception in FM
radio mode. This occurs particularly when the stations are close together in the
frequency range. The TravelPilot gives you the option of using the SHARX
function to largely keep this kind of interference in check.
Activating / deactivating SHARX
To activate / deactivate the TravelPilot’s SHARX function,
1
switch to the setup menu by pressing the MENU button
:
and
2
keep pressing the softkey associated with the
SHARX
menu item until the
required
ON
or
OFF
option appears. The default setting is
ON
.
JUMP
TMCSTORE
SCAN
TMC-SCAN
PAGE 1
T-STORE
JUMP
REG
ON
PTY
ON
RDS
VAR OFF
R-TXT
ON
SHARX
ON
TA