Blaupunkt DX-R70 User Manual
Page 35

35
INTRODUCTION
NAVIGATION
RADIO MODE
CD MODE
INDEX
SETUP
CD CHANGER
ENGLISH
DEUTSCH
DEUTSCH
DEUTSCH
Changing the audio source
You can change the audio source at any time during navigation.
1
Press the TUNE
A
or CD.C
@
button during an active navigation ses-
sion.
✔
The main menu for radio mode or CD changer mode opens. CD changer
mode is only available if a CD changer is connected and operational. It is
not possible to play a CD in the internal CD drive during a navigation
session.
2
Now, for instance, you can select another station or another track.
If you want to switch back to the navigation session display,
3
press the NAV button
?
.
Cancelling navigation
To cancel an active navigation session,
1
press the ESC button
<
or
1
enter a new destination or
1
switch to position tracking mode (see “Position tracking mode” in this
chapter).
✔
If you pressed the ESC button
<
, the system asks you to confirm your
choice.
If you are sure you want to cancel navigation,
4
select
YES
and
5
press the OK button
8
.
TIP: If you switch the unit off whilst navigation is active, the data for that
navigation session will be stored for 30 minutes. You can continue navi-
gation at any time within this time period (e.g. after stopping for petrol).
Note: If you remove the navigation CD during a navigation session,
NO MAP navigation will be activated.
NAVIGATION
TO INTERRUPT
ROUTE GUIDANCE?
DO YOU WANT
YES
NO
Confirmation request before cancelling navigation