Blaupunkt DX-R70 - Manual (Page 52)

INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER
52
Saving a position marker
After you press the OK button
8
, a selection menu opens. You are now given
the option of assigning a name to the position marker or returning to the menu in
which you set the position marker.
If you select the NAME option and enter a name for the position marker, the
name will be automatically stored in the destination memory.
1 Select the NAME menu item.
✔ A speller will open for you to enter the short name.
2 Enter a short name,
3 keep the OK button
8
pressed for longer than two seconds or
3 select the symbol and press the OK button 8 .
✔ The position marker is saved in the destination memory with the short
name that you entered.
If you selected CONTINUE , the menu from which you set the position marker will
be opened without a short name being saved for the position marker.
The position marker is then saved together with the time in the POSITION MARK
memory in the destination memory.
Note: A maximum of five position markers (together with the time)
can be saved in the
POSITION MARK memory.
NEW NAME
ÄÖÜ 1234567890
PQRSTUVWXYZ -/.
HOME _
TIME: 03:27
E
ABCD E FGHIJKLMNO