Blaupunkt DX-R70 - Manual (Page 53)

53
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER
ENGLISH
DEUTSCH
DEUTSCH
DEUTSCH
Traffic announcements during navigation
You can switch traffic announcement standby during navigation on/off.
1 Press the MENU button : .
✔ The navi menu is displayed.
2 Select the TA menu item and
3 press the OK button
8
.
✔ The TA function is activated or deactivated. The current ON or OFF state
is indicated.
4 Press the ESC button
<
to open the navigation display.
TIP: You can also switch the TA function on/off using the macro button.
Activating / deactivating voice output
You have the option of navigation with or without voice output. The voice output
informs you of the distance to the decision points and provides you with audio
driving recommendations.
1 Press the MENU button : .
✔ The navi menu is displayed.
2 Select the LANGUAGE menu item.
3 Keep pressing the OK button
8
until the required ON or OFF option is
highlighted. The default setting is ON .
4 Press the ESC button
<
to close the navi menu.
NAVI. MENU
TA ON
ROUTE LIST
POSITION MARK
ROUTE OPTION
SYMBOLS 2D