Blaupunkt DX-R70 - Manual (Page 62)

INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER
62
Tuning into FM stations
The TravelPilot provides several options for tuning into radio stations.
Automatic seek tuning
To tune into stations automatically,
1 press the button on the rocker switch
7
to seek tune upwards or
1 press the button on the rocker switch
7
to seek tune downwards.
If the TA function is activated, the unit will only tune into stations that support
traffic announcements (TA symbol in the display).
TIP: You can adjust the sensitivity used during seek tuning. For further
information, read the section entitled “Adjusting seek tuning sensitivity”
in the “Setup” chapter.
Browsing through broadcasting networks (only for RDS stations)
An example of a broadcasting network is Norddeutsche Rundfunk NDR, which
includes the NDR1, NDR2, Radio3, NDR INFO and N-JOY radio stations.
You can directly tune into RDS stations in the reception area. If the unit is able to
receive several stations that are on the same network, you can browse back
and forth within the broadcasting network using the / buttons on the rocker
switch
7 .
Note: This feature will only work if the unit has received these stati-
ons at least once already. For instance, begin a scan seek tuning
session or activate the Travelstore function. For further informati-
on, read the appropriate sections entitled “Scan seek tuning” and
“Storing stations automatically” in this chapter.
Tuning into stations manually
If you already know a station’s frequency, you can tune into it manually. This
can be useful if you want to tune into a station that is not picked up by the
automatic seek tuning feature.