Blaupunkt DX-R70 User Manual

Page 108

INTRODUCTION

NAVIGATION

RADIO MODE

CD MODE

INDEX

SETUP

CD CHANGER

108

Preparing a second KeyCard

A second KeyCard can be prepared as an additional KeyCard if the TravelPilot
is being operated with the first KeyCard inserted.

If you want to prepare a second KeyCard,

insert the first KeyCard and switch the unit on.

Open the setup menu.

Select the

KEYCARD

menu item.

Press the OK button

✔

You will be requested to remove the KeyCard and insert a new KeyCard.
Please follow the instructions provided by the TravelPilot.

Note: A maximum of two KeyCards can be used for each device. If
you already own two KeyCards for the unit and then prepare a third,
the KeyCard that was not inserted whilst the third KeyCard was being
prepared can no longer be used to operate the unit.

Preparing a new KeyCard (“Learning”) / Entering the master code

If you no longer have a KeyCard for the TravelPilot, you can prepare a new
KeyCard yourself. To do so, you will require the master code for your Travel-
Pilot. You will find the master code printed on your TravelPilot’s equipment pass.

Note: Keep the equipment pass in a safe place. Never leave the equip-
ment pass in the vehicle!

If you want to prepare a new KeyCard,

insert the new KeyCard - one which is not known to the TravelPilot - and
close the control panel.

Switch on the TravelPilot and

within the next 10 seconds, simultaneously press the NAV button

and

the second button from the top left next to the display.

SETTINGS

INSTALL

DEFAULT SET.

KEYCARD

FM-SEEK

SENS

CODE-LED