DIGIWEIGH DWP-98 - Manual (Page 23)

space.
14 COMMA SEPARATION
15~16
UNIT
kg = kilogram
g_= gram (_ = blank space)
lb = pound
17 Cr
18 LF
7.2 PRT (PRINTER) MODE
7.2.1 Printing Current Transaction
A standard printout as will be sent through the RS232 Comport when
[PRINT]
14
is pressed. Refer to Standard Printout Sample on next page
for description.
Number of copies sent = the number of copy set in internal function F8.
Refer to 5 INITIAL SETUP for more information. If extra copies are needed,
press [PRINT] again.
7.2.2 Printing the Totalized Accumulated Result
Follow the below steps for to print the totalized accumulated result: -
a. Remove all loads from platter,
b. If zero weight reading cannot be obtained when unloaded, press
[ZERO]
c. Press [M+] then followed by [PRINT], The below data and format
will be sent
15
,
Refer to Totalized Accumulated Printout Sample on next page for
description.
14
Pressing [PRINT] will not accumulate transaction to memory. Press [M+] to
trigger memory accumulation and print function simultaneously
15
The number of copies sent = the number of copy set in internal function F8. Refer
to 5. INITIAL SETUP for more information. If extra copies are needed, press [PRINT]
again.