DIGIWEIGH DWP-1001 - Manual

DWP-1001
Operator’s Manual
Congratulations for purchasing DIGIWEIGH precision tabletop balance. With normal care and proper
treatment, the scale will provide years of reliable service. Please take a few minutes to read the Operator’s
Manual so that you can become acquainted with the proper usage and special features of your DIGIWEIGH
scale.
SPECIFICATIONS
Please check the rating label located on the bottom of your scale and find the capacity and readability.
HOW TO USE THE SCALE
Place the scale on a rigid horizontal flat surface.
Press ON/OFF button to switch on the scale and wait until “0.0” is showed on the display screen. Please
make sure the scale is under the environment with stable temperature.
Put the object(s) on the center of the platform. Wait until the display is stable. The readout equals the
weight of the object(s) on the platform.
Press MODE button to choose different weighing units.
After use, just press ON/OFF to switch off the scale.
HOW TO USE TARE FUNCTION
Tare function can make it easier to weigh tiny things or liquid.
Press ON/OFF button to switch on the scale. Put the container of weighing object(s) on the center of
platform, press TARE button and the screen shows “0.0”. Take the container off and put the weighing
object(s) in the container and put the container again on the center of the platform.
Wait until the screen is stable, the readout equals the weight of the weighing object(s).
HOW TO USE COUNTING FUNCTION
Your scale has counting function for small parts. Please follow these steps:
Sampling: Prepare sample quantity (25, 50, 75 or 100 PCS) of the items you want to count; put the items on
the platform; press and hold PCS button until the scale shows “P 25” or “P 50” or “P 75” or “P 100”; press
MODE button to switch the above figures to match the quantity of the items on the platform; press PCS
again and the scale will switch back to weighing mode; Sampling completed.
Counting: Put the items you want to count on the platform of the scale; press PCS button and the scale will
show the quantity of these items.
You don’t have to do the sampling again if you count the same item, even the scale is turned off and turned
on. If you want to count another item, you need to redo the sampling.