DIGIWEIGH DW-250BT - Manual

BT series
Operator’s Manual
Congratulations for purchasing DIGIWEIGH BT series precision pocket scale. With normal care and proper
treatment, the scale will provide years of reliable service. Please take a few minutes to read the Operator’s
Manual so that you can become acquainted with the proper usage and special features of your DIGIWEIGH
pocket scale.
SPECIFICATIONS
Please check the rating label located on the bottom of your scale and find the capacity and readability. Now
DIGIWEIGH BT series is providing following capacity and readability combinations:
Model DW-250BT
Capacity: 250 g or 8.82 oz or 3857 gn or 1250 ct or 160.8 dwt or 8 ozt
Readability: 0.1 g or 0.01 oz or 1 gn or 0.5 ct or 0.1 dwt or 0.01 ozt
Repeatability: 0.1 g or 0.01 oz or 1 gn or 0.5 ct or 0.1 dwt or 0.01 ozt
Linearity: 0.2 g or 0.02 oz or 2 gn or 1 ct or 0.2 dwt or 0.02 ozt
Model DW-350BT
Capacity: 350 g or 12.35 oz or 5400 gn or 1750 ct or 225.1 dwt or 11.2 ozt
Readability: 0.1 g or 0.01 oz or 1 gn or 0.5 ct or 0.1 dwt or 0.01 ozt
Repeatability: 0.1 g or 0.01 oz or 1 gn or 0.5 ct or 0.1 dwt or 0.01 ozt
Linearity: 0.2 g or 0.02 oz or 2 gn or 1 ct or 0.2 dwt or 0.02 ozt
Model DW-500BT
Capacity: 500 g or 17.64 oz or 7715 gn or 2500 ct or 321.5 dwt or 16 ozt
Readability: 0.1 g or 0.01 oz or 1 gn or 0.5 ct or 0.1 dwt or 0.01 ozt
Repeatability: 0.1 g or 0.01 oz or 1 gn or 0.5 ct or 0.1 dwt or 0.01 ozt
Linearity: 0.2 g or 0.02 oz or 2 gn or 1 ct or 0.2 dwt or 0.02 ozt
HOW TO USE THE SCALE
Place the scale on a rigid horizontal flat surface.
Hold both side of the cover and slide the cover to the left to expose the plat form. Or you can pull the sliding
cover out to use it as a scoop. Slide the cover back in after using.
Take out the tray on the platform and flip it over to use it as a tray if needed.
Press ON/OFF button to switch on the scale and wait until “0.0” is showed on the display screen. Please
make sure the scale is under the environment with stable temperature.
Put the object(s) on the center of the platform. Wait until the display is stable. The readout equals the
weight of the object(s) on the platform.
Press MODE button to choose different weighing units.
After use, just press ON/OFF to switch off the scale. Slide the cover back in.
HOW TO USE TARE FUNCTION
Tare function can make it easier to weigh tiny things or liquid.
Press ON/OFF button to switch on the scale. Put the container of weighing object(s) on the center of
platform, press TARE button and the screen shows “0.0”. Take the container off and put the weighing
object(s) in the container and put the container again on the center of the platform.
Wait until the screen is stable, the readout equals the weight of the weighing object(s).