Despatch LCC1-51-3 - Manual (Page 19)

10
LCC/LCD1-16 & 51-3 WITH WATER COOLING UTILITY CONNECTIONS
Nitrogen or Clean
Dry Air Inlet.
70 to 80 PSI (4.83 to
5.52 Bar).
Used to purge water
out of the coil prior to
heating the oven.
1/4” NPT female
brass connections
are provided.
During cooling cycle,
water flows through the
water coil and out this
connection.
3/8” NPT female brass
connections are
provided.
Piping must be rated for
up to 250
°
F (121
°
C)
At the end of a cooling
cycle, Nitrogen or Clean
Dry Air is purged
through the water coil.
Water and pressurized
nitrogen/air exit this
connection for 30
seconds. Must be
connected to gravity
style drain (no
backpressure).
3/8” NPT female brass
connections are
provided.
Piping must be rated for
up to 250
°
F (121
°
C)
Water Inlet for cooling.
3/8” NPT female brass
connections are
provided.
Requires 2 GPM flow at
61
°
F (16
°
C) to meet
published cooling rates.
MAXIMUM PRESSURE
100 PSI (6.89 Bar)