CounterPath Bria 3.0 for Mac User Guide - Retail Deployments - Manual (Page 62)

CounterPath Corporation
58
Preferences – Network
Field Description
Network Connection Speed Select the type of network connection for your computer.
The sliders move to show the bitrate that will be used for sending and receiving. These rates are
typical rates for the selected configuration.
If you know that your computer and network can handle a faster sending speed, click Custom
and move the slider.
It is recommended that you not change the receiving speed.
You will know that you have set the sending speed too high if the remote audio is garbled.
You will know that you have set the sending speed too high if:
• The remote video shows black areas or is slow or jerky.
• The remote audio is garbled.
You will know that you have set the sending speed too low if the audio is good but the video is of
poor quality (grainy).
Video Image Quality Select the desired quality for video.
Preserve bandwidth When this feature is on, Bria stops sending audio when you are not talking.
When this feature is off, Bria always sends audio, which uses more bandwidth but may result in
better call quality.
Typically off. However, if you are using a slow (dial-up or ISDN) connection, you may want to
turn it on.