CounterPath Bria 3.0 for Mac User Guide - Retail Deployments - Manual (Page 61)

Using Bria 3.0 for Mac – Retail Deployments
57
Field Description
Headset Mode
Speaker
Microphone
Change these fields only if you want to override the devices that Bria automatically selected.
In both these fields, select the headset you are using.
The headset is the device that is usually used for audio out (the sound you hear) and audio in
(recording your voice). The only situation in which the headset is not used is when the Speaker
Phone button on the dialpad is pressed.
Therefore, unless you will always be using Bria in speakerphone mode, you must make a selection
here.
Select the headset in both the Speaker device field and Microphone device field.
Speakerphone Mode
Speaker Change this field only if you want to override the devices that Bria automatically selected.
Make the appropriate choice:
• Select the device that you want to use for audio out (the sound you hear) when the Speaker
Phone button is pressed. Make sure you select a speaker device (not the headset).
• Select None if you do not have a speaker phone. The Speaker Phone button on the dialpad is
disabled.
Microphone Change this field only if you want to override the devices that Bria automatically selected.
Make the appropriate choice:
• Select the device that you want to use for audio in (recording your voice) when the Speaker
Phone button is pressed.
It can be any microphone: it does not have to be the microphone on the device you specified as
the speaker device. For example, it can be the microphone on your camera.
• Select None if you do not have a speaker phone. The Speaker Phone button on the dialpad is
disabled.
Phone Ring Device
Device Change this field only if you want to override the devices that Bria automatically selected.
The device where you want to hear the phone ringing: the headset, the speakerphone, or none.
Volume The volume of the ringer.
Camera
Camera This field appears only on versions of Bria that include video functionality.
Change this field only if you want to override the devices that Bria automatically selected.
Select the camera model.
Miscellaneous
Zero-touch device
configuration Typically, leave on. When device configuration is on, if you change your audio or video device,
Bria will automatically detect the new device and start using it.
Test Devices For information on the Test Devices button, see “Troubleshooting” on page 67.