COATS 9024E Tire Changer User Manual
Page 7
Important: Always read and follow the operating instructions.
• 3
ẩ
Slide Locking Valve — Locks and unlocks hori-
zontal/vertical slide and sets correct vertical/hori-
zontal position to maintain duckhead/wheel
clearance.
Ẫ
Slide Adjustment Handle — Adjusts horizon-
tal/vertical slide assembly for proper horizontal
and vertical positioning of duckhead
®
.
ẫ
DuckHead
®
— Mounts and demounts tire from
wheel.
Ậ
Bead Sealing Nozzles — Expands tire sidewall
to bead seat area of rim to seal tire to rim and
allow inflation.
ậ
Tower Tilt Pedal — Two-position pedal that
moves tower forward or back.
Ắ
Clamp Control Pedal — Three-position pedal that
opens, holds, or closes rim clamps.
ắ
Bead Loosener Pedal — Controls operation of
bead loosener shoe.
ằ
Tabletop Pedal — Three-position pedal that con-
trols rotation of tabletop (forward, off, reverse).
Ẳ
Bead Loosener Shoe — Pivoting shoe for loos-
ening tire beads.
ẳ
Lube Bucket — Dispenser for rubber lubricant.
Ẵ
Important Safety Decal — Important safety
information for the operator. DO NOT obstruct
with tire stickers or other materials.
ặ
Horizontal and Vertical Slides — Allows correct
positioning of duckhead
®
.
ằ
ắ
Ẳ
ẳ
ẩ
ậ
Ắ
Ẵ
ặ
ẫ
Ậ
Ẫ
- 16 Bit PCB & Metal Arm Temporary (4 pages)
- 520 Wheel Lift (12 pages)
- 700 Decal Location (1 page)
- AirNut (12 pages)
- Application Chart, Balancing Solutions (12 pages)
- Autoflate Nitrogen (1 page)
- Balancer Adapter Wall Storage Board Kit (1 page)
- Balancer Adapter, 5 lug x 135mm Bolt Pattern (1 page)
- Balancer Adapter, 5 lug x 150mm Bolt Pattern (1 page)
- Balancer Adapter, 5 lug x 4.750 Bolt Pattern (1 page)
- Balancer Adapter, 5 lug x 5.5 Bolt Pattern (1 page)
- Balancer Adapter, 6 lug x 150mm Bolt Pattern (1 page)
- Balancer Adapter, 6 lug x 5.5 Bolt Pattern (1 page)
- Balancer Adapter, 8 lug x 170mm Bolt Pattern (1 page)
- Balancer Adapter, 8 lug x 180mm Bolt Pattern (1 page)
- Balancer Adapter, 8 lug x 6.5 Bolt Pattern (1 page)
- Conversion Instructions (1 page)
- Extended Balancer Stub Shaft (1 page)
- Fixed Finger Plates (2 pages)
- Hood Installation (1 page)
- Hood Installation Instruction (1 page)
- Hood Installation Sheet (1 page)
- Hood Installation Tip (1 page)
- Hubnut Removal (1 page)
- Side Accessory Tray (1 page)
- Kit 1.125-inch, Kit 40 mm, Light Truck Cone (1 page)
- Kit 1.125-inch, Kit 40 mm, XL Pressure Drum (1 page)
- Kit 8111177 Three Phase to Single Phase Conversion (1 page)
- Kit 8111864 Motorcycle Wheel Adapter (4 pages)
- Kit 8111935 Light Truck Back Cone Spacer (1 page)
- Kit 8112877 Touch Panel Replacement (2 pages)
- Kit 8113082 40mm Conversion Shaft (1 page)
- Kit 8113223 (1.125-inch), Kit 8113228 (40 mm), VW/Porsche Adapter (1 page)
- Kit 8113592, Wheel Lift Link (1 page)
- Kit 8113645 Radial Runout Sensor Adjustment Kit (2 pages)
- Kit 8113860 Splash Guard (1 page)
- Kit 8113881 Printer Serive (1 page)
- Kit 8113883 Printer Bracket Serive (1 page)
- Kit 8113887 XR 1800 Upgrade to XR 1850 (2 pages)
- Kit 8113893 Lateral Run Out Service (1 page)
- Kit 8113900 Monitor Replacement (1 page)
- Kit 8113932 16 Bit PCB & Metal Arm (1 page)
- Kit 8114025 PCB Assembly (1 page)
- Kit 8114105 PCB Assembly Kit (1 page)
- Kit 8114155 Serial Loader (4 pages)