COATS 50xx Series Tire Changer User Manual
Page 4

Principal Operating Parts
Know Your Unit
Compare this illustration with the unit before placing
it into service. Maximum performance and safety will
be obtained only when all persons using the unit are
fully trained in its parts and operation. Each user
should learn the function and location of all controls.
Prevent accidents and injuries by ensuring the unit
is properly installed, operated, and maintained.
Tower — Support for horizontal and vertical
slides, also air storage tank.
Air Inflation Gauge — Registers tire pressure
when clip-on chuck is attached to valve stem
and inflation pedal is released.
Inflation Pedal — Three position pedal that
allows inflation of tires through air hose and
clip-on chuck.
Clamp Control Pedal — Three position pedal
that opens and closes rim clamps.
Table Top Pedal — Three position pedal that
controls rotation of table top.
Table Top — Rotating chuck for tire changing.
Clamps — Secures wheel to table top for tire
changing.
Adjustable Clamp (5060 AX/EX) — Adjusts out-
ward to allow outside clamping of wheels up to 21”.
Lube Bottle — Dispenser for rubber lubricant.
Combination Mount/Demount Head —
Mounts and demounts tire from wheel.
Do It Now
Now is a good time to fill out the Owner's
Registry Card.
Swing Arm Adjustment Knob — Adjusts
swing arm/vertical slide assembly for proper
horizontal positioning of mount/demount head.
Vertical Slide Locking Handle — Locks and
unlocks vertical slide and sets correct vertical
position to maintain head/wheel clearance.
Bead Lifting Tool — Used to lift and position
tire bead correctly on mount/demount head.
Bead Loosener Shoe — Pivoting shoe for
loosening tire beads.
Bead Loosener Handle/Button — Controls
operation of bead loosener shoe.
Oil Check Dipstick — For transmission oil
level.
Bead Sealing Nozzles — Expands tire
sidewall to bead seat area of rim to seal and
allow inflation.
Pressure Safety Valve — The high pressure
safety valve is set to exhaust at line pressures
above 185 PSI.
Release Valve — Allows the manual release of
air pressure from tire.
2 • COATS 50xx Series Rim Clamp Tire Changers
1
2
8
7
6
5
4
3
✓
9
10
11
12
13
14
15
16
17
18
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
19
* Model 5060 Shown