COATS Wheel Lift for use with 9024E Rim Clamp Tire Changer - Manual (Page 3)

COATS Tire Changer Accessory • 3
2. Unscrew the 4 screws and washers and remove
the pedal cover. (Fig. 5, 6, & 7)
3. Position and align the Wheel Lift Assembly with
the holes on the machine body. (Fig. 8)
4. Slightly screw in the 4 screws with washer sup-
plied to hold the Wheel Lift up. (Fig. 9)
5. Make sure that the Wheel Lift is correctly posi-
tioned and that the lifting plate is well aligned with
ground, and then tighten the screws. (Fig. 10)
5 Fig. 5
5 Fig. 9
5 Fig. 8
5 Fig. 7
5 Fig. 6
5 Fig. 10