COATS Kit 8110584, Pressure Limiter - Manual (Page 3)

5. Attach 37-inch long hose (ref
5) to pressure limiter port B.
Attach quick coupler end to
end of 37-inch long
hose. Securely fas-
ten all clamps.
Reattach quick cou-
pler.
6. Reinstall side
panel.
7. Check unit for proper
operation. Refer to the pressure lim-
iter maintenance section on page 4 of this
instruction.
8. Remove lens cover from air gauge and install new
decal to gauge as shown in diagram. Reinstall lens
cover.
9. Review proper technique and operation with the
operators and supervisors.
Ref# Part No. Description
1 8103649 1/4" Hose x 12" L.G.
2 8109466 Valve
3 8109468 Pressure Repeater
4 8109471 1/8" Close Nipple
5 8109472 1/8" Inline Filter
6 8110325 1/4" NPT Male Run Tee
7 8110496 Volume Chamber
8 8111083 Regulator
9 8111255 Special Tee
10 8182035 Male Straight Fitting
11 8182038 1/4" OD Nylon Tube
12 85606362 14mm Spring Hose Clamp
13 8110497 Fitting - 90º Male Elbow
14 8143169 1/4"-20 Whiz Lock Nut
15 8120408 1/4"-20 x 1 3.4" H.H.C.S.
Pressure Limiter Kit Parts List
8110585 01 3 of 4