Recording audio – chiliGREEN M670SRU User Manual
Page 176
Windows XP Information
E - 8 Recording Audio
E
Recording Audio
(Model A & B Computers)
The
audio record hot key button allows you to record audio from either the built-in microphone, or from a
microphone connected to the microphone-in jack. To record on the computer, setup the audio recording options
in Windows as follows (see
Figure E - 6 on page E - 9
).
1.
Go to the Start menu and point to Settings (or just click Control Panel) and click Control Panel, then double-
click the Sounds & Audio Devices icon (Sounds, Speech, and Audio Devices in Category View).
2.
Click Advanced in the Volume > Device volume tab.
3.
Click Options and scroll down and click Properties.
4.
Select HD Audio rear input from the Mixer device menu and click OK (make sure there is a tick in the
Microphone tick box).
5.
Boost the volume in the Microphone section as high as it will go (make sure there is a tick in the Select tick
box).
6.
Close the open windows.
7.
You can also boost the microphone from Mixer > Recording in the VIA Audio Deck
8.
Press the audio record button
to begin the recording process (the record icon
will flash in the top left of
the screen).
9.
Press the audio record button again to stop the recording process (the record icon will disappear from the top
left of the screen).
10. The recorded audio file (in .wav format) will appear in the Shared Documents > Wav folder in My Computer.
11. Double-click the file to playback the recorded audio.