chiliGREEN M670SRU User Manual
Page 137
Troubleshooting
Problems and Possible Solutions 8 - 11
8
The
Wireless LAN/
Bluetooth modules
cannot be detected.
The modules are off. Check the LED indicator
and/or function key indicator to see if the
WLAN/Bluetooth module is on or off (see
“LED Indicators” on page 1 - 9
). If the LED indicator is
off, then press the Fn + F11 (WLAN) or Fn + F12 (Bluetooth) key combination(s) in order to
enable the modules (see
“Function Keys” on page 1 - 10
).
The PC Camera module
cannot be detected.
The module is off. Press the Fn + F10 key combination in order to enable the module (see
“Function Keys” on page 1 - 10
). Run the BisonCap program (see
“PC Camera Module” on page E - 47
) to view the camera picture.
The
Wireless LAN/
Bluetooth/ PC Camera
modules cannot be
configured.
The driver(s) for the module(s) have not been installed. Make sure you have installed the driver
for the appropriate module (see the instructions for the appropriate module in
The
BisonCap
PC
Camera application
displays the message
“Sorry, please turn on
the Video Capture
power (Fn + F10).” after
resuming power from
manually entering a
power-saving state.
The BisonCap application may not recognize that the camera module is powered on if you
manually put the system into Sleep or Hibernate, and then resume, when the BisonCap
application is still running.
Before putting the system into a power-saving state close the BisonCap application. If you
resume from a power-saving state and see the error message displayed by the BisonCap
application, simply quit the application and run it again.
Problem
Possible Cause - Solution