chiliGREEN M670SRU User Manual
Page 149
VIA Video Driver Controls
Attaching Other Displays B - 5
B
External displays may also be configured from S3Display tab in Advanced Display
Settings
:
1.
Attach the external display to the external monitor port and turn it on.
2.
Click Advanced Settings in the Display Settings control panel (see
) to display the additional tabs.
3.
Select S3Display (tab).
4.
Click to put a tick in the tickbox under the CRT icon.
5.
Click Apply > OK and allow the monitor time to refresh the display.
6.
Click Yes to confirm the settings.
7.
Select the CRT icon, and then click Refresh Rate to change the settings for the
attached display.
S3Tray Plus Utility
You can also use the
S3Tray Plus utility in
the taskbar to configure
an external display.
Attach the external dis-
play (CRT) to the exter-
nal monitor port.
Right-click the
icon
in the taskbar and select
S3Display.
Select the CRT (it
should have a tick
alongside it) and click
Yes to confirm the set-
tings.
Figure B - 3
S 3Display