chiliGREEN P170HM - Manual (Page 22)

Concise User’s Guide
16 - Video Features
English
Stereoscopic 3D Hardware Setup
This computer (Model D Computers Only) features a
built-in 3D IR emitter. The effective viewing angles of
the emitter are illustrated below. Make sure that you are
viewing the notebook screen within the area highlighted
below in order to get the proper stereoscopic 3D effect.
Figure 10 - IR Emitter Location
Viewing Angles
The emitter’s horizontal viewing angle is 100 degrees.
The emitter’s vertical viewing angle is 75 degrees.
Figure 11 - Emitter - Viewing Angles
IR Emitter Location
3D Icon

USB Connection & 3D Glasses
The light on the glasses will flash amber while charg-
ing, and solid amber when fully charged.
The glasses hold approximately 40 hours of viewing per
full charge. Flashing red indicates that less than 2 hours
of charge are remaining.
The indicator light displays for about 30 seconds after
turning the glasses on.
75
