chiliGREEN 15 4 M665NC - Manual (Page 48)

Features & Components
2 - 10 Function Keys
2
Recording Audio
The audio record hot key button allows you to record audio from either the built-
in microphone, or from a microphone connected to the microphone-in jack. To
record on the computer, setup the audio recording options in Windows as follows
(see
Figure 2 - 7 on page 2 - 11 ).
1. Go to the Start menu and point to Settings (or just click Control Panel) and click
Control Panel, then double-click the Sounds & Audio Devices icon (Sounds,
Speech, and Audio Devices in Category View).
2. Click Advanced in the Volume > Device volume tab.
3. Click Options and scroll down and click Properties.
4. Select Realtek HD Audio input from the Mixer device menu.
5. Click Mic Volume (check box) if it is not checked, then click OK.
6. Make sure the Select (check box) in the Recording Control panel, under the Mic
Volume section, is checked (boost the volume as high as it will go).
7. Click Advanced (button).
8. Click to put a tick in the 1 Microphone Boost box, and then click Close.
9. Close the Recording Control window, and then click OK.
10. Press the audio record hot key button to begin the recording process (the
record icon will flash in the top left of the screen).
11. Press the audio record hot key button again to stop the recording process (the
record icon will disappear in the top left of the screen).
12. The recorded audio file (in .wav format) will appear in the Shared Documents >
Wav folder in My Computer.
13. Double-click the file to playback the recorded audio.