System map: left view, System map: left view -11 – chiliGREEN 15 4 M665NC User Manual
Page 31
System Map: Left View 1 - 11
Quick Start Guide
1
System Map: Left View
1
5
2
4
6
3
7
Changing DVD Regional Codes
Go to the Control Panel and double-click System >
Hardware (tab), click Device Manager, then click
the + next to DVD/CD-ROM drives. Double-click on
the DVD-ROM device to bring up the Properties di-
alogue box, and select the DVD Region (tab) to
bring up the control panel to allow you to adjust the
regional code (see
).
DVD region detection is device dependent, not OS-
dependent. You can select your module’s region
code 5 times. The fifth selection is permanent. This
cannot be altered even if you change your operating
system or you use the module in another computer.
Figure 1 - 5 - Left View
1.
Security Lock Slot
2.
Optical Device Drive Bay
(see page
)
3.
RJ-11 Modem Jack
4.
S/PDIF-Out Jack
5.
Microphone-In Jack
6.
Headphone-Out Jack
7.
Line-In Jack
CD Emergency Eject
If you need to manually eject a CD/DVD (e.g. due to an unex-
pected power interruption) you may push the end of a straight-
ened paper clip into the emergency eject hole. Do not use a
sharpened pencil or similar object that may break and become
lodged in the hole.
Media Warning
Don’t try to remove a floppy disk/CD/DVD while the system is
accessing it. This may cause the system to “crash”.